UHC-HD
1-4
1.3 Install Grill Clip
The grill clip is designed to hold the 1/3-size grill tray. It
attaches to the grill to make transfer from the grill to the
UHC faster and safer.
Position the front of the grill clip under the lip
of the grill.
Lower the back of the clip until the grooves rest
over the grill bar. The grill clip should firmly
seat on the front of the grill. If the clip doesn’t
fit snuggly, simply loosen the four nuts under
the clip and slide it in or out as needed to tighten
against the bar. Tighten the nuts after the clip is
properly adjusted.
The grill clip attaches to the grill and holds
grilled product in a UHC-HD tray, making
transfer to the holding cabinet easier.
To Next Page
Loading...
