EN
Site Environment
Front Panel LEDs
Back Panel
Grounding Point
Power Supply
SYS
SFPPWR RJ45
Do not operate it in an area that exceeds an ambient temperature of 50°C.
The installation site must be well ventilated. Ensure that there is adequate air flow around the
switch.
Be sure that the switch is level and stable to avoid any hazardous conditions.
Do not install the equipment in a dusty environment.
The installation site must be free from leaking or dripping water, heavy dew, and humidity.
LEDs
Status Description
PWR Green Switch is powered on.
SYS
Orange 10/100M connection.
1000M connection.Green
Off
Green
Off No signal transmission.
1000M connection.
No signal transmission.
Blinking Green System is working properly.
RJ45
SFP
3
To Next Page
Loading...
