FS S5860-20SQ - Troubleshooting; Common Faults and Solutions

Troubleshooting
The indicator on the front panel of host is OFF. The Status indicator of fan module is OFF, and the fan
does not work. The indicator on the panel of the power module is OFF and the fan does not work.
Please check the following:
First disconnect the power cord of the power module.
1. Whether the cables of the cabinet have been correctly connected.
2. Whether the cabinet power sockets are loosely connected to power modules.
3. Whether the power modules are installed correctly.
After power-on, if the conguration terminal shows nothing, you can rstly check the following:
1. Whether serial port cables are connected correctly.
2. Whether the conguration of the serial port on the HyperTerminal.
If the conguration terminal shows error codes, it is likely that the terminal (such as HyperTerminal)
parameters are set incorrectly. Please conrm the parameters of the terminal (such as HyperTerminal).
Power System Fault
Troubleshooting for Terminal No-show
Troubleshooting for Terminal Show Error Codes