To Next PageTo Next Page
Need help?Do you have a question about the FS S5860 Series and is the answer not in the manual?
General| Category | Switch |
|---|---|
| MAC Address Table Size | 128K |
| Series | S5860 |
| Operating Temperature | 0°C to 45°C |
| Dimensions | 440mm x 400mm x 43.6mm (17.32in x 15.75in x 1.72in) |
| VLAN Support | 4096 |
| Storage Temperature | -40°C to 70°C |
| Jumbo Frame | 9K |
Overview of the S5860 Series Switches and their purpose in the guide.
Lists the accessories provided with the S5860 Series Switches.
Details the layout and types of ports on the front and back panels of the switches.
Explanation of various port types like RJ45, SFP+, SFP28, QSFP+, MGMT, and CONSOLE.
Describes the functionality of buttons such as FUNC and PoE on the switch panels.
Identifies back panel components like fan slots, power supplies, and grounding points.
Introduces the front and back panel LED indicators on the switches.
Describes the status and meaning of the STATUS LED indicator.
Explains the status of System, Power, Fan, MGMT, and ID indicators.
Describes the status of SFP+, SFP28, and QSFP+ port indicators.
Details LED statuses specific to the S5860-48SC model.
Details LED statuses specific to the S5860-24XB-U model.
Details PWR, FAN, PoE, MGMT, and RJ45 LED statuses for the S5860-24XB-U.
Explains the PoE (1-24) LED status on the S5860-24XB-U.
Describes the status of SFP+ and SFP28 port LEDs for the S5860-24XB-U.
Lists prerequisites and tools needed before starting the installation.
Specifies environmental conditions required for proper switch installation and operation.
Step-by-step guide for mounting the switch on a desk.
Step-by-step guide for mounting the switch in a standard rack.
Procedure for properly grounding the network switch for safety.
Instructions for connecting the power cord to the switch and power source.
Guide on connecting Ethernet cables to RJ45 ports on the switch.
Instructions for connecting SFP/SFP+ transceivers and fiber optic cables.
Steps to connect SFP28 transceivers and fiber optic cables.
Guide on connecting QSFP+ transceivers and fiber optic cables.
Instructions for connecting QSFP28 transceivers and fiber optic cables.
Procedure for connecting the console cable to the switch and computer.
Steps for connecting the management port to a computer using an Ethernet cable.
Information on how to stack multiple S5860 series switches together.
Steps to configure the switch via its web interface using a computer.
Provides guidance for diagnosing and resolving power system faults.
Addresses troubleshooting for remote connection failures and non-working ports.
Offers solutions for terminal no-shows and error codes during configuration.
Links to download resources, help center, and contact information.
Information on product warranty terms and the return policy.
