EasyManua.ls Logo

FSN IPS710A - RF Wireless Communications Immunity; RF Immunity Test Specification

FSN IPS710A
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
10/2021
3. For the use of ME devices in professional healthcare facilities.
Test speci cation for ENCLOSURE PORT IMMUNITY to RF wireless communica-
tions equipment (according to IEC 60601-1-2:2014)
The device is intended for use in the electromagnetic environment speci ed below.
The user of the device should make sure that it is used in such an environment.
Test fre-
quency
MHz
Band
MHz
Service
Modulation
Maximum
power
W
Distance
m
IMMUNITY
TEST LEVEL
V/m
385 380 to 390 TETRA 400
Pulse modulation
18 Hz
1.8 1.0 27
450 430 to 470
GMRS 460,
FRS 460
FM
± 5 kHz stroke
± 1 kHz sine wave
2 1.0 28
710
704 to 787 Band 13, 17
Pulse modulation
217 Hz
0.2 1.0 9745
780
810
800 to 960
GSM 800/900
TETRA 800,
iDEN 820,
CDMA 850,
LTE Band 5
Pulse modulation
18 Hz
2 1.0 28870
930
1720
1700 to
1990
GSM 1800,
CDMA 1900,
GSM 1900,
DECT,
LTE Band 1,3,
4, 25 UMTS
Pulse modulation
217 Hz
2 1.0 281845
1970
2450
2400 to
2570
Bluetooth,
WLAN 802.11
b/g/n,
RFID 2450,
LTE Band 7
Pulse modulation
217 Hz
2 1.0 28
5240
5100 to
5800
WLAN 802.11
a/n
Pulse modulation
217 Hz
0.2 1.0 95500
5785
*Note: If necessary to achieve the IMMUNITY TEST LEVEL, the distance between the transmitting antenna
and the device may be reduced to 1 m. The 1 m test distance is permitted by IEC 61000-4-3.

Related product manuals