3
10/2021
Product Description / Intended Use
IPS710A
IPS710A features video recording up to
1080P at 60Hz. System controls are managed
through a graphic interface shown on a con-
nected external monitor using a mouse and
keyboard or a touchscreen.
Selected system control can also be accessed
using the screen and buttons on front of the
unit. The graphic user interface gives quick
access to options for setup, recording, capture,
le storage, patient information, play back,
and data backup functions.
Intended Purpose
This device is intended to be connected to other medical equipment. This device is not intended
for diagnosis. This device is intended to be compatible with other highly specialized surgical and
diagnostic equipment used in surgical suites, operating rooms, emergency rooms, and proce-
dural facilities.
Intended Use Environment
This device is intended to be used by a trained medical professional in a healthcare facility set-
ting where contact with a patient is unlikely (no applied part).
This device is designed to meet the medical safety requirements for a patient vicinity device.
Warning: This device may not be used in connection with life support equipment.
Indications for Use
This device is to be used by a trained medical professional. This device records and stores video
and still images during surgical procedures for later playback or transfer to other media. This
device is not intended for diagnosis.
IPS740DS, IPS740DG
IPS740D series is an all-in-one 4K medical
video recording system that captures still
images or records extended sessions of video
signals for later playback or transfer to other
media.
All recorded les are stored on an internal
hard disk drive. These les can then be played
back on a display monitor, or transferred to
variety of media including external drives,
memory sticks, and network folders or servers.
System controls are managed through a
graphic interface shown on the front LCD
screen, or on a connected external monitor.
To Next Page
Loading...
