Fuel Ergometer FE 300 - Computer Operation; Display Functions Explained

34
COMPUTER OPERATION
TIME
Count up ‐
No preset target, Time will count up from 00:00 to maximum
99:59 with each increment is 1 minute.
Count down
‐
If training with
preset Time, Time will count down from preset to 00:00.
Each preset
increment
or decrement is 1 minute between 00:00 to 99:00.
SPEED
Displays current training speed. Maximum speed is 99.9 KM/H.
RPM
Displays the Rotation Per Minute. Display range 0~15~999
DISTANCE
Accumulates total distance from 0.00 up to 99.99 KM. The user may
preset target distance data by using UP/DOWN b
utton. Each preset
increment or decrement is 0.1KM or ML between 0.00 to
99.90.
CALORIES
Accumulates calories consumption during training from 0 to maximum
9999 calories.
(This data is a rough guide for comparison of different
exercise sessions
which can not be used in medical treatment.)
PULSE
User
may set up target pulse from 0
‐
30 to 230; and computer buzzer
will beep when actual heart rate
is over the target value during
workout.
In order to measure the pulse correctly, put your hands onto the
hand
pulse sensors or wear a compatible breaststrap.
WATTS
Display current workout watts. Display range 0~999.
MANUAL
Manual mode workout.
BEGINNER
4 PROGRAM selection.
ADVANCE
4 PROGRAM selection.
SPORTY
4 PROGRAM selection.
CARDIO
Target HR training mod
e.
WATT PROGRAM
WATT constant training mode.