54
AUX, USB Interface and Bluetooth
®
You may connect an external audio device to the AUX connector on the device. Music can only
be played, when the power is switched on and the device is not in sleep mode.
The USB interface is suitable for charging function purpose only.
The computer supports Bluetooth
®
transmission for MP3 music. After successful pairing, you
may play music via the integrated speakers.
Errors / Error codes
No display: Check all cable connections and if the power source is correctly connected.
E01: Signal transmission failure from control board to display.
E02: Short circuit or motor problem. Check for correct voltage supply.
E03: Sensor signal failure.
E04: Incline motor failure.
E05: Overload protection.
E06: Motor connection failure.
E08: Memory error.
E10: Short-circuit / Motor failure.
E13: Communication failure control board to display.
In all cases, try to re-start the device after checking all cable connections. If you cannot solve the
problem with these explanations, contact the customer service.
To Next Page
Loading...
