Need help?Do you have a question about the Fuji Electric MONITOUCH TS1070 and is the answer not in the manual?
General| Brightness | 400 cd/m² |
|---|---|
| Backlight Life | 50, 000 hours |
| Display Type | TFT Color LCD |
| Touch Type | Resistive |
| Communication Ports | RS-422/485, Ethernet |
| Power Supply | 24 VDC |
| Operating Temperature | 0°C to 50°C |
| Memory | 128MB Flash |
| CPU | RISC Processor |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% (non-condensing) |
| Shock Resistance | 147 m/s² (X, Y, Z directions 3 times each) |
| Protection Rating | IP65 (front panel) |
Covers electrical, physical, and mechanical specifications of the TS series.
Details for COM ports, USB, and Ethernet interfaces, including standards and baud rates.
Connecting printers, USB memory, CF recorders, keyboards, mice, and hubs via USB-A.
Step-by-step guide for mounting the TS series unit onto a panel.
Instructions for connecting the power supply cable, including torque and cable specs.
Details on proper grounding methods for safe operation and electrical protection.
Covers safety, backup, and step-by-step replacement for the lithium battery.
Methods for transferring screen data for the first time via USB, storage, or Ethernet.
Setting up IP addresses and network parameters for Ethernet communication.
Performing tests on interfaces (COM, USB) and touch switch functionality.
Calibrating the touch panel for accurate input response and position.
Details on communication errors and their solutions, including Time-Out, Parity, and Framing.
Steps to diagnose and resolve common errors like communication failures and switch issues.
To Next Page
