Fuji Electric PEN152J1RT/15 - ５-３ Other LCD Display

25
５-３ Other LCD display
When ▲ button /▼ button is pushed in normal display, other states are displayed.
The content of the display in the standby as follows. A similar display is done at
other states. If ▲ button /▼ button is not pushed, the display return to usual
display.
Figure ５-2 Other display
Minute/Second display in BACK UP T transfers by backup time.
Refer the BACK UP T as a rough standard.
No8 Effective/Invalidity is displayed only in powerdown.
No8 indicates ６-１-８ .
EBM1 REPOOFF 10 0 EBM1 REPOOFF 10 0
STAND-B Y I NPUT Ｉ＝ｘｘ．ｘＡ
EBM1 REPOOFF 10 0 EBM1 REPOOFF 10 0
INPUT V＝ｘｘｘ．ｘV INPUT F＝ｘｘ．ｘHｚ
EBM1 REPOOFF 10 0 EBM1 REPOOFF 10 0
LOAD% L＝ｘｘｘ％ OUTPUT Ｐ＝ｘｘｘｘＷ
EBM1 REPOOFF 10 0 EBM1 REPOOFF 10 0
OUTPUT ＶＡ＝ｘｘｘｘＶＡ OUTPUT Ｉ＝ｘｘ．ｘＡ
EBM1 REPOOFF 10 0 EBM1 REPOOFF 10 0
OUTPUT V＝ｘｘｘ．ｘV OUTPUT F＝ｘｘ．ｘHｚ
EBM1 REPOOFF 10 0 EBM1 REPOOFF 10 0
BA TTERY Ｖ＝ｘｘｘ．ｘV BA TTERY CAP＝ｘｘｘ％
EBM1 REPOOFF 10 0 EBM1 REPOOFF 10 0
BACK UP Ｔ＝ｘｘｘｍｉｎ BACK UP Ｔ＝ｘｘｘｓｃｄ
EBM1 REPOOFF 10 0 EBM1 REPOOFF 10 0
No8 EFFECTIVE No8 INVALIDITY