Need help?Do you have a question about the Fuji Electric PEN102J1C and is the answer not in the manual?
General| Topology | Line Interactive |
|---|---|
| Output Waveform | Sinewave |
| Frequency | 50/60 Hz |
| Form Factor | Tower |
| Operating Temperature | 0-40°C |
| Apparent Power | 1000 VA |
| Real Power | 600 W |
| Communication Interface | USB |
Precautions for personnel and safety measures during battery replacement.
Details FCC Part 15 compliance for commercial environments and potential interference.
Defines DANGER, CAUTION, and ATTENTION levels for safety notices.
Explains the various symbols used for attention, prohibition, and compulsion.
Emphasizes reading safety notes to prevent accidents and damage.
Guidelines for using the UPS in various environments and applications.
Identifies risks such as electric shock, fire, and electromagnetic radiation.
Warnings related to fire, explosion, electric shock, and unauthorized repair.
Precautions concerning electrical safety, fire prevention, and proper handling.
Guidance on cleaning, storing, and determining when to replace UPS batteries.
Detailed steps and precautions for replacing internal UPS batteries.
Procedures for exchanging External Battery Modules (EBM) in different configurations.
Procedures for battery testing, proper disposal, and fuse replacement.
Steps for confirming contents, checking for damage, and selecting an installation location.
Instructions for installing the UPS, including rackmount and tower configurations.
Wiring guidelines specific to 1.5kVA, 2.4kVA, and 3kVA UPS models.
Explanation of On-Line, On-HE, On-Battery, and other operating modes.
Guide to navigating the UPS menu and changing settings via the panel.
Detailed steps and safety precautions for replacing internal UPS batteries.
Covers voltage, frequency, power, output, and overload characteristics.
Table listing common UPS issues, causes, and recommended actions.
To Next Page