Fuji Xerox ApeosPort-IV 5070

Specifications
567
Appendix
16
Stacker Capacity
z
Output Tray
500 sheets (A4)
z
Finisher Tray (For paper not stapled)
A4 : 1,500 sheets
B4 or larger : 100 sets or 1,500 sheets
Mixed stack
*1
: 300 sheets
z
Finisher Tray (For paper stapled)
A4 : 200 sets or 1,500 sheets
B4 or larger : 100 sets or 1,500 sheets
z
Booklet Tray
20 sets
*2
Important • When using 80 gsm paper
•
*1
Based on when larger size paper is stacked on paper.
•
*2
The amount of paper listed above may vary depending on
the conditions, such as the paper type.
Staple
z
Capacity
50 sheets (60 - 90 gsm (56 - 90 gsm when the HCF Kit
(optional) is installed.))
z
Paper Size
Maximum : A3, 11 × 17"
Minimum : B5
z
Position
1 place (front/back/angled stapling), 2 places (parallel stapling)
Punch
z
Paper Size
A3, 11 × 17", B4, A4, A4 , 8.5 × 11", 8.5 × 11" , B5
z
Number of Holes
2/4 holes (Optional: US 2/3 holes)
z
Paper Weight
60 - 200 gsm (56 - 200 gsm when the HCF Kit (optional) is
installed.)
Booklet Finishing
*1
z
Capacity
15 sheets
*1
(center binding), 5 sheets (center folding), 1 sheet
(center folding/single)
z
Paper Size
Maximum : A3, 11 × 17"
Minimum : A4, 8.5 × 11"
z
Paper Weight
60 - 90 gsm
*2
(center binding), 60 - 105 gsm (center folding), 60
- 216 gsm (center folding/single)
Important • When using 80 gsm paper
•
*1
14 sheets when attaching a cover. In the case of center
folding, the maximum number of sheets can be changed by
the customer engineer.
•
*2
Up to 216 gsm paper can be used for covers. When 91 to
216 gsm paper is used for a cover, paper that can be used
for body contents becomes 60 to 90 gsm.
Dimensions/Weight Width 876 × Depth 639 × Height 1,058 mm, 90 kg
Space Requirement
(when connected to the
main unit)
Width 1,804 × Depth 1,104 mm (Main Unit + Finisher-C1 with
Booklet Maker)
Important • When the extension trays and the Tray 5 (Bypass) are fully
extended.