16 Appendix
602
Appendix
16
Line termination 218 Sets line termination processing.
[0] (Default) : Off
[1] : Add-LF (Appends an LF to CR)
[2] : Add-CR (Appends a CR to LF and FF)
[3] : CR-XX (Appends a CR to LF and FF, and LF to CR)
Default custom
paper size
219
(Short
edge)
Specifies the default custom paper size.
[2100] (Default short-edge value) : 210.0 mm
[2970] (Default long-edge value) : 297.0 mm
[0] - [9999] : 0 to 999.9 mm
220
(Long
edge)
Print Quantity
Setup
221 Sets the method for specifying the number of copies to print.
[0] : Protocol
[1] : Panel
[2] (Default) : Command
Parameter
I
tem
No.
Value
To Next Page
Loading...
