Fuji Xerox ApeosPort-V 3060 - Page 559

Error Code
559
Problem Solving
15
027-564
[Cause] SMB protocol error. The SMB server was not found.
[Remedy] Check whether the connection between the authentication
server and the machine has been established via a network.
For example, confirm the following conditions:
z
Network cable connection
z
TCP/IP settings
z
Connection via Port 137 (UDP), Port 138 (UDP), and Port 139
(TCP)
027-565
[Cause] SMB protocol error
[Remedy] Execute the operation again. If the error still is not resolved,
contact our Customer Support Center.
027-566
[Cause] SMB protocol error. SMB (TCP/IP) is not active.
[Remedy] Enter the System Administration mode, and select [Tools] >
[Connectivity & Network Setup] > [Port Settings].On this screen,
confirm [SMB Client] is set to [Enabled].
027-569
[Cause] The SMB (TCP/IP) port is not activated.
[Remedy] Enter the System Administration mode, and select [Tools] >
[Connectivity & Network Setup] > [Port Settings].On this screen,
confirm [SMB Client] is set to [Enabled].
027-572
027-573
027-574
027-576
027-578
[Cause] SMB protocol error
[Remedy] Execute the operation again. If the error still is not resolved,
contact our Customer Support Center.
027-584
[Cause] SMB protocol error. The SMB server is in shared security mode.
[Remedy] The SMB server may be set on Windows 95, Windows 98, or
Windows Me OS. Set the SMB server on an OS other than
Windows 95, Windows 98, or Windows Me OS.
027-585
[Cause] SMB protocol error. Login is disabled at this time.
[Remedy] Confirm the period login permitted with your system
administrator.
027-586
[Cause] SMB protocol error. The password has expired.
[Remedy] Obtain a valid password from your system administrator.
027-587
[Cause] SMB protocol error. The password must be changed.
[Remedy] Log into Windows, and change the password. Ask your system
administrator to change the setting so that you do not need to
change the login password next time.
027-588
[Cause] SMB protocol error. The user is invalid.
[Remedy] Ask your system administrator to validate the user.
027-589
[Cause] SMB protocol error. The user was locked out.
[Remedy] Ask your system administrator to cancel the lockout status.
027-590
[Cause] SMB protocol error. The user account has expired.
[Remedy] Obtain a valid user account from your system administrator. Or,
ask your system administrator to extend the account expiration
date.
Error Code
Cause and Remedy