EasyManua.ls Logo

Fuji Xerox ApeosPort-V 3060 - Page 561

Fuji Xerox ApeosPort-V 3060
751 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Error Code
561
Problem Solving
15
027-713
[Cause] The received e-mail has been discarded because it may have
been altered on its transmission route.
[Remedy] Inform this error to the sender, and ask the sender to send the e-
mail again.
027-714
[Cause] The received e-mail has been discarded because the address in
its From field is different from the mail address in the S/MIME
signature mail.
[Remedy] Inform the sender that the mail addresses differ, and ask the
sender to send the e-mail again.
027-715
[Cause] The received S/MIME certificate has not been registered on the
machine, or has not been set for use on the machine.
[Remedy] Import the sender's S/MIME certificate to the machine, or
change settings to use the S/MIME certificate on the machine if
the S/MIME certificate has already been registered.
027-716
[Cause] The received S/MIME certificate has been discarded because
the certificate was unreliable.
[Remedy] Ask the sender to send the e-mail with a reliable S/MIME
certificate attached.
027-717
[Cause] Unable to obtain SMTP server address for e-mail transmissions
from the DNS server.
[Remedy] Check whether the DNS server is set correctly.
027-720
[Cause] Unable to find the server of an application interface
destination.
[Remedy] Confirm the DNS server address. Or, check whether the
computer on which the application (ApeosWare Flow Service) is
installed has been registered on the DNS server.
027-721
[Cause] An application interface destination does not exist.
[Remedy] Check whether the application linked (ApeosWare Flow Service)
is operating correctly.
027-722
[Cause] The jobs timed out during connection with an application
interface destination.
[Remedy] Try processing the job flow again.
027-723
[Cause] Authentication at the application interface destination
(ApeosWare Flow Service) failed.
[Remedy] Confirm the user name and password that is used when
creating a job flow.
027-724
[Cause] An application interface destination (ApeosWare Flow Service)
could not be accessed.
[Remedy] Check whether ApeosWare Flow Service is operating correctly. If
it is operating correctly, confirm the log.
027-725
[Cause] A job operation failed using an application interface.
[Remedy] Check whether the application linked (ApeosWare Flow Service)
is operating correctly. If it is operating correctly, confirm the log.
If it is not operating, confirm the network environment.
Error Code
Cause and Remedy

Table of Contents

Other manuals for Fuji Xerox ApeosPort-V 3060

Related product manuals