Problem Solving
562
Problem Solving
15
027-726
[Cause] The status of the application interface destination (ApeosWare
Flow Service) is unknown.
[Remedy] Check whether ApeosWare Flow Service is operating correctly. If
it is operating correctly, confirm the log.
027-727
[Cause] A parameter is illegal during an application interface.
[Remedy] Try processing the job flow again.
027-728
[Cause] The number of files that are to be sent to external services
exceeded the maximum number.
[Remedy] Reduce the number of files, and send them again.
027-730
[Cause] The number of the document pages attached to the SMTP mail
exceeds the maximum number of pages allowed for the Split
Send feature.
[Remedy] Increase the number of pages allowed for the Split Send
feature, or reduce the number of the document pages.
027-731
[Cause] An error occurred in the machine.
[Remedy] After the scanning for Network Scanning completes, execute
the operation again.
027-732
[Cause] The Network Scanning server is full, or a server disk error
occurred.
[Remedy] Check the amount of available disk space. If the disk space is
sufficient and the error still is not resolved, check the status of
the disk of the server.
027-733
[Cause] The SSL setting on the Network Scanning server is disabled.
[Remedy] Enable the SSL setting of the Network Scanning server.
027-734
[Cause] The certificate of the server used for Network Scanning is not
set correctly.
[Remedy] Check the followings:
z
The Network Scanning server is accessible from your
computer using HTTPS protocol.
z
The SSL server certificate of the Network Scanning server is
registered on the machine.
z
The SSL server certificate of the Network Scanning server is
correct.
z
When the certificate is not registered on the Network
Scanning server, disable the server certificate validation
feature of the machine.
027-735
[Cause] The data transfer using SSL is specified, but the SSL setting of
the machine is disabled.
[Remedy] Enable the SSL setting, or specify HTTP for the transfer protocol.
027-736
[Cause] The server certificate verification feature of the machine is
disabled when the server certificate verification is required.
[Remedy] Enable the server certificate validation. Or, disable the server
certificate validation for data transfer.
Error Code
Cause and Remedy
To Next Page
Loading...
