Fuji Xerox ApeosPort-V 4020 - Operations during Scanning; Stopping the Scan Job

5 Scan
230
Scan
5
Operations during Scanning
The following describes the operations available during scanning. The following shows the
reference section for each operation.
Stopping the Scan Job................................................................................................................................................................ 230
Previewing the Scanned Images during a Scan Job............................................................................................................ 231
Changing Scan Settings ............................................................................................................................................................. 234
Stopping the Scan Job
To cancel scanning a document, use the following procedure.
1 Press either the <Stop> button on the control
panel or [Delete] on the touch screen.
2 Select [Delete].
 If [Delete] does not appear on the screen:
1 Press the <Job Status> button.
23
56
89
0
＃
C
Power
Saver
Power Data Error
Clear All
Interrupt Stop
Start
Log In / Out
Job
Status
ABC
Dial
Pause
Speed
Dial
TUV WXYZ
JKL MNO
DEF
Machine
Status
<Stop> button
23
56
89
0
＃
C
Power
Saver
Power Data Error
Clear All
Interrupt Stop
Start
Log In / Out
Job
Status
ABC
Dial
Pause
Speed
Dial
TUV WXYZ
JKL MNO
DEF
Machine
Status
<Job Status> button