Fuji Xerox ApeosPort-V 5070

Specifications
591
Appendix
16
 C3 Finisher (optional)
Booklet Finishing
z
Capacity
Saddle Staple: 15 sheets, Scoring: 5 sheets
z
Paper Size
Maximum: A3, 11 x 17"
Minimum: A4, Letter
z
Paper Weight
Saddle Staple: 60 to 80 gsm, Scoring: 60 to 105 gsm
Dimensions/Weight Width 643 x Depth 552 x Height 942 mm, 28 kg
Width 643 × Depth 597 × Height 1057 mm, 37 kg (With Booklet Finisher)
Space Requirement (when
connected to the main
unit)
Width 1615 x Depth 709 mm
Important • When the extension tray and the Tray 5 (Bypass) are fully extended.
Type
z
Output Tray x 1
Sorting/Stacking
z
Finisher Tray x 1
Sorting (Offset available)/Stacking (Offset available)
Paper Size
z
Paper Size (Output Tray)
Maximum: A3, 11 x 17"
Minimum: Postcard (100 × 148 mm)
z
Paper Size (Finisher Tray)
Maximum: A3, 11 x 17"
Minimum: B5 , 8 × 10"
Paper Weight Paper Weight (Output Tray)
60 to 216 gsm
*
Paper Weight (Finisher Tray)
60 to 216 gsm
*
* : 56 - 216 gsm when the HCF Kit (optional) is installed.
Paper Capacity
z
Output Tray
500 sheets (A4)
z
Finisher Tray (For paper not stapled)
A4: 3000 sheets
B4 or larger: 1500 sheets
Mixed stack*: 300 sheets
z
Finisher Tray (For paper stapled)
A4 : 200 sets or 3000 sheets
B4 or larger: 100 sets or 1500 sheets
Mixed stack*: 70 sets or 200 sheets
Important • When using 80 gsm paper
* : Based on when larger size paper is stacked on paper.
Staple
z
Capacity
50 sheets (90 gsm or less)
z
Paper Size
Maximum : A3, 11 x 17"
Minimum : B5 , 8 × 10"
z
Position
Single stapling (Front, Back / Angled), Dual stapling (Parallel)