Fuji Xerox ApeosPort-V 5070

16 Appendix
592
Appendix
16
 C3 Finisher with Booklet Maker (Optional)
Punch
z
Number of Holes
2/4 holes (Optional: US 2/3 holes)
z
Paper Size
A3, 11 x 17", B4, A4
*
, A4 , Letter
*
, Letter , B5 , 7.25 x 10.5", 8 x 10",
8 x 10", 16K, Cover A4, 9 x 11", 215 x 315 mm, 8.5 x 13", Legal, 11 x 15",
8K
* : 3-hole punch is not applicable.
z
Paper Weight
60 - 200 gsm
Dimensions/Weight W 730 × D 589 × H 1056 mm, 44 kg (C3 Finisher)
W 965 × D 726 × H 1056 mm, 98 kg (C3 Finisher + Folder Unit CD1)
Space Requirement (when
connected to the main
unit)
Width 1719 x Depth 699 mm (Main Unit + C3 Finisher)
Width 1956 x Depth 699 mm (Main Unit + C3 Finisher + Folder Unit CD1)
Important • When the extension trays and the Tray 5 (Bypass) are fully extended.
Type
z
Output Tray x 1
Sorting/Stacking
z
Finisher Tray x 1
Sorting (Offset available)/Stacking (Offset available)
z
Booklet Tray x 1
Sorting/Stacking
Paper Size
z
Output Tray
Max.: A3 , 11 × 17" , Min.: PostCard (100 × 148 mm)
z
Finisher Tray
Max.: A3 , 11 × 17" , Min.: B5 , 8 × 10"
z
Booklet Tray
Max.: A3 , 11 × 17" , Min.: B5
Paper Weight
z
Output Tray
60 to 216 gsm
*1
z
Finisher Tray
60 to 216 gsm
*1
z
Booklet Tray
60 to 105 gsm
*1*2
*1 : 56 - 216 gsm when the HCF Kit (optional) is installed.
*2 : The basis weight of a cover sheet shall be equal to or less than 216 gsm.
Paper Capacity
z
Output Tray
500 sheets (A4)
z
Finisher Tray (For paper not stapled)
A4 : 1500 sheets
B4 or larger : 1500 sheets
Mixed stack
*1
:300 sheets
z
Finisher Tray (For paper stapled)
A4 : 200 sets or 1500 sheets
B4 or larger : 100 sets or 1500 sheets
Mixed stack
*1
: 70 sets or 200 sheets
z
Booklet Tray
20 sets
*2
Important • Depending on the conditions, such as the paper type. When using 80
gsm paper
*1 : Based on when larger size paper is stacked on paper.
*2 : The amount of paper listed above may vary depending on the conditions, such as the
paper type.