More Options
247
Fax
4
1 Pick up the telephone receiver, or select [On-
hook (Manual Send/Receive)].
2 Select any option.
Manual Send / Manual Receive
Use the drop-down menu to switch between [Manual Send] and [Manual Receive].
Entering a destination
Use alphanumeric characters to specify a destination.
Note • Some touch-tone services may not be available even if you set your telephone to send tones.
• When the line type is set to a tone line, [:] (Tone) is not displayed on the screen. If you want to send
tones (or to use the touch-tone services) while using a pulse line, select [:] (Tone).
More Characters
Select this button to display a symbol screen, allowing you to use symbols to specify a
destination.
Line Cut
Cuts the line connected.
z
Manual Send : Allows you to check if connection is established before
sending a fax.
z
Manual Receive : Allows you to receive a fax manually, such as Facsimile
Information Services.
To Next Page
Loading...
