Fuji Xerox ApeosPort-V 6080

Power Saver Mode
25
Before Using the Machine
1
4 Select [System Settings] > [Common Service
Settings] > [Power Saver Settings].
5 Select [Power Saver Timers], and then select
[Change Settings].
6 Using [ ] and [ ], set the time to elapse until
entering the Power Saver mode, in 1 minute
increments.
 From Last Operation to Low Power Mode
Set the time to elapse from the last operation
until the machine enters the Low Power mode.
Note • The default value for [From Last Operation to
Low Power Mode] is 1 minute. You cannot disable the Low Power mode.
 From Last Operation to Sleep Mode
Set the time to elapse from the last operation until the machine enters the Sleep mode.
Note • The default value for [From Last Operation to Sleep Mode] is 1 minute. To make the machine enter
the Low Power mode, set a longer period of time for [From Last Operation to Sleep Mode] than for
[From Last Operation to Low Power Mode].
7 Select [Save].
8 Select [Close] repeatedly until the [Tools] screen is displayed.
9 Select [Close].