15 Problem Solving
584
Problem Solving
15
3 Return the Handle [2g] to the original position
and push back the tri-fold output Tray [2d].
4 Close the finisher right door.
Note • If the finisher front door is not completely closed, a message will appear and the machine will
remain paused.
Paper Jams at the Unit [4] and Knob [4a] for the D2-Staple-Finisher with Booklet Maker
1
Make sure that the machine is not in operating,
and open the finisher right door.
2 Pull out the unit [4].
3 Turn the Knob [4a] to the left to remove all the
jammed paper from the left side of the unit 4.
Note • If paper is torn, check for any torn pieces of
paper inside the machine.
4 Return the unit [4] to the original position.
5 Close the finisher right door.
Note • If the finisher front door is not completely closed, a message will appear and the machine will
remain paused.
To Next Page
Loading...
Need help?
General
