Fuji Xerox ApeosPort-V C5575 - Registering;Deleting;Renaming Stored Programs

Registering/Deleting/Renaming Stored Programs
375
Stored Programming
8
Registering/Deleting/Renaming Stored Programs
You can register and delete stored programs on the [Stored Programming] screen.
1 Press the <Services Home> button.
2 Select [Setup].
3 Select [Stored Programming].
4 Select a feature.
 Store
Register a stored program.
Refer to "Registering Stored Programs" (P.376).
 Store Build Job
Register a stored program for Build Job.
Refer to "Registering Stored Programs for Build Job" (P.378).
 Delete
Deletes a stored program. Select the stored program number to be deleted.
Refer to "Deleting Stored Programs" (P.378).
 Enter/Change Name
Enter or change the name of a stored program.
Refer to "Entering/Changing a Stored Program Name" (P.379).
 Assign/Change Icon
Specify an icon for a registered stored program.
Refer to "Assigning/Changing Icons for Stored Programs" (P.379).
<Services Home> button