1 Before Using the Machine
22
Before Using the Machine
1
4 Press the main power switch to the [ ] position to switch off the main power.
5 Connect the network cable to the Ethernet interface connector.
Note • Always use the correct network cable with your network connection. When you replace the cable,
contact our Customer Support Center.
When the Secondary Ethernet (optional) is
not installed
Note • To use as the Gigabit Ethernet interface
connector, install the Gigabit Ethernet
(optional).
When the Secondary Ethernet (optional) is
installed
Note • The Secondary Ethernet can be used as the
Gigabit Ethernet interface connector.
• To also use the standard Ethernet interface
connector as the Gigabit Ethernet interface
connector, install the Gigabit Ethernet
(optional).
6 Press the main power switch to the [ | ] position to switch on the main power.
7 Close the machine front door.
8 Press the power switch to switch on the power.
For more information on setting items, refer to "Printer Environment Settings" (P.329).
To Next Page
Loading...
Need help?
General
