Fuji Xerox apeosport-v c6685 - Page 567

Error Code
567
Problem Solving
15
045-390
045-391
[Cause] An error occurred in the cooling fan.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
045-392
045-393
045-394
045-395
045-396
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
046-310
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
047-210
[Cause] An error occurred in the machine.
[Remedy] Make sure that the finisher's power cable on the back is properly plugged in an outlet.
If not, switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the same message is displayed again, contact our
Customer Support Center.
047-310
[Cause] An error occurred.
[Remedy] Make sure that the finisher's power cable on the back is properly plugged in an outlet.
If not, switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the same message is displayed again, contact our
Customer Support Center.
047-311
[Cause] A communication error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
047-312
047-313
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
047-320
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
059-313
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
059-326
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
059-335
059-399
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
Error Code Cause and Remedy