15 Problem Solving
574
Problem Solving
15
093-332
[Cause] The toner cartridge [M] (magenta) is not finished with replacement.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
093-333
[Cause] The toner cartridge [C] (cyan) is not finished with replacement.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
093-334
[Cause] An error occurred in the toner cartridge [K] (black).
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
093-401
[Cause] The toner cartridge [Y] (yellow) is not installed.
[Remedy] Install the toner cartridge [Y] (yellow).
093-403
[Cause] The toner cartridge [M] (magenta) is not installed.
[Remedy] Install the toner cartridge [M] (magenta).
093-404
[Cause] The toner cartridge [C] (cyan) is not installed.
[Remedy] Install the toner cartridge [C] (cyan).
093-426
[Cause] An error occurred in the toner cartridge [K] (black).
[Remedy] Pull out the toner cartridge [K] (black), and then insert the cartridge again.
093-427
[Cause] An error occurred in the toner cartridge [Y] (yellow).
[Remedy] Pull out the toner cartridge [Y] (yellow), and then insert the cartridge again.
093-428
[Cause] An error occurred in the toner cartridge [M] (magenta).
[Remedy] Pull out the toner cartridge [M] (magenta), and then insert the cartridge again.
093-429
[Cause] An error occurred in the toner cartridge [C] (cyan).
[Remedy] Pull out the toner cartridge [C] (cyan), and then insert the cartridge again.
093-431
[Cause] The toner cartridge [K] (black) is not installed.
[Remedy] Install the toner cartridge [K] (black).
094-318
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
094-320
094-321
094-322
094-323
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
Error Code Cause and Remedy
To Next Page
Loading...
