6 Troubleshooting
144
Troubleshooting
6
6
Push the staple cartridge into the machine until
it clicks into place.
7
Close the finisher front cover.
Note • If the finisher front cover is not completely closed, a message will appear and the machine remains
paused.
If you cannot remove jammed staples even after you perform the above procedure, contact
our Customer Support Center.
Staple Jams in Staple Cartridge (for Finisher B1)
This section describes how to clear staple jam occurred in the staple cartridge of the Finisher
B1 (optional).
1
Make sure that the machine is not operating,
and open the finisher front door.
2
Grasp the handle to pull out the staple
cartridge to the right, towards you.
3
Move up the staple cartridge, and then take it
out of the machine.
To Next Page
Loading...
Need help?
General
