3 Basic Operation
66
Basic Operation
3
5
When all documents have been scanned, select
[Last Original].
Step 5 Confirming the Copy Job in Job Status
If copies are not output after you start the copy job, the job may be in pending status. Use
the following procedure to confirm the job status.
1
Press the <Job Status> button.
2
Confirm the job status.
Stopping the Copy Job
To cancel a copy job in progress, use the following procedure.
1
Press either the <Stop> button on the control
panel or [Delete] on the touch screen.
2
Select [Delete].
If [Delete] does not appear on the screen:
1
Press the <Job Status> button.
To Next Page
Loading...
Need help?
General
