Maintenance
114
Maintenance
3
2
Wipe the white chute with the provided cloth.
z
Do not press the film with an excessive force as it can be easily damaged.
z
Do not use cleaning agents other than water or neutral detergent.
z
If you cannot remove dirt easily, gently wipe the white chute with a soft cloth moistened with a small amount
of neutral detergent.
3
Wipe the Side 1 constant velocity transport glass and the Side 2 constant velocity transport
glass with the provided cloth.
z
Do not use cleaning agents other than water or neutral detergent.
z
If you cannot remove dirt easily, gently wipe the glass with a soft cloth moistened with a small amount of
neutral detergent.
4
Close the Side 2 scanner, and then close the document feeder gently.
To Next Page
Loading...
Need help?
General
