Optional Components
745
Appendix
16
C3 Finisher Punch Unit
2H/3H
2/3 hole-punches output sheets.
z
C3 Finisher or C3 Finisher with Booklet Maker is required.
C3 Finisher Staple Unit
65 Sheets
Staples output sheets. Up to 65 sheets can be stapled depending
on the type of paper.
z
C3 Finisher or C3 Finisher with Booklet Maker is required.
HCF B1 A tray that can load 2,030 sheets of paper (When using 80 gsm
paper).
English Kit Allows the machine to support English.
z
For China and Taiwan
Wing Table A kit to load related products such as IC Card Reader, or to secure
work space.
z
Voice Guidance 2 cannot be installed to this table.
z
This table can be installed to the left side of the printer.
Wing Table A kit to load related products such as IC Card Reader, or to secure
work space. (For Voice Guidance 2)
z
This table can be installed to the left side of the printer.
Attention Light II Tells you the status of the machine such as malfunction, printing,
or faxing staxtus.
Assist Handle A tool to aid you in opening the document glass cover.
Accessory Table B A table to load related products.
z
This table can be installed to the right side of the printer.
Voice Guidance 2 Allows you to operate the machine using the numeric keypad,
following the the voice guidance.
z
Wing Table and USB Hub are required.
Full Stack Sensor Detects and tells you whether the stack is full.
Smart WelcomEyes Advance
2
Detects human presence using two motion sensors and
automatically exits the Power Saver mode. The simple
authentication system by face detection is also availableusing a
camera.
Long Paper Inserter Allows you to load long paper of 1200 mm or less in length.
Wireless LAN Converter Converts the machine that supports 10/100/1000BASE-T wired
LAN to the machine that supports wireless LAN.
Adobe PostScript 3 Kit Allows you to use the machine as a PostScript printer. Also enables
printing from Macintosh.
TC/SC Additional Fonts Kit Supports Chinese fonts.
Product Name Description
To Next Page
Loading...
Need help?
General
