Appendix
768
Appendix
16
3
Select the tray in which you loaded paper, select [2-Sheet Stack], and press the <Start>
button.
The sample is printed.
4
Select the tray in which you loaded paper, select [16-Sheet Stack], and press the <Start>
button.
The sample is printed.
5
Select [Close].
6
Check the sample printout, measuring the position misaligned amount for 2-sheet stack
and 16-sheet stack.
7
Select [Booklet Fold State (2 Sheets)].
8
Select the state of the fold and staple position of the printout, and enter the 2-sheet stack
misalignment amount you measured in step 6 in [Values A & B Before Adjustment].
9
Select [Save].
To Next Page
Loading...
Need help?
General
