Fuji Xerox ApeosPort-VI C5571 Administrator's Guide

Replacing Consumables
97
Maintenance
3
1 Make sure that the machine is not operating, and open the finisher side cover.
2 Hold the tabs on both sides of the staple cartridge and pull the cartridge out of the finisher.
3 Hold the tabs on both sides of a new staple cartridge, and insert it into the original position
until it clicks.
4 Repeat steps 2 and 3 to replace the other staple cartridge.
5 Close the finisher side cover.
Note
z
If the cover is not completely closed, a message will appear and the machine remains paused.

Fuji Xerox ApeosPort-VI C5571 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-VI C5571
Category	All in One Printer
Language	English