Fuji Xerox ApeosPort-VII CP4421 User Manual

13 Appendix
302
Basic Settings
Parameter Item No. Value
Document size 101 [0]: A0
[1]: A1
[2]: A2
[3]: A3
[4]: A4
[5]: A5
[10]: B0
[11]: B1
[12]: B2
[13]: B3
[14]: B4
[15]: B5
[99] (Default): Auto
[100]: Paper
When [Auto] is selected, the settings of the Scaling mode, the Area
Determination mode, and the Paper Margin settings of Print Control become
enabled.
Note

If the document size other than [Auto] is selected, the settings under [Auto layout]
become [OFF].

Depending on the combination of [Document size] and [Paper size], the document
is printed at a scale of 100%.
Paper size 102 Set the paper size of when [Paper tray] is set to [Auto] or [Tray 5]. Only cut
sheet can be set.
[4]: A4
[5]: A5
[15]: B5
[99]: Auto
[101] (Default): A Size
Important

When Trays 1 to 4 is selected, [Paper size] cannot be set. The paper size loaded in
the specified tray is displayed.
Note

If [A Size] or [Auto] is selected, the settings become as follows:
- When [Document size] is set to other than [Auto], [Paper size] is set to [A4].

Depending on the combination of [Document size] and [Paper size], [?] may be
displayed for the magnification. In this case, the document is printed at a scale of
100%.
Paper tray 103 [0] (Default): Auto
[1]: Tray1
[2]: Tray2
[3]: Tray3
[4]: Tray4
[5]: Tray5
Note

When [Auto] is selected and paper of the same size in the same orientation in
multiple trays is loaded, paper will be fed in the order of Tray 1  Tray 2  Tray 3
 Tray 4. If paper of the same size is loaded in multiple trays but in different
orientations, feeding of the paper loaded in the landscape orientation is prioritized.
Coordinate
rotation
104 [0] (Default): 0 degrees
[1]: 90 degrees

Fuji Xerox ApeosPort-VII CP4421 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-VII CP4421
Category	Printer
Language	English