Light Production Finisher C/Z Folder (D4 Folder Unit) Capacity
An optional Folder unit that can handle Z-fold, Tri-C, and Tri-Z, can be added to the Finisher D4.
• The C/Z folding tray can accommodate 30 sheets of up to 90 gsm uncoated media.
• Supported Paper size is A4 to the Folder Drawer, A3 to the Top Tray
• Fold accuracy as shown below:
Interposer for the Light Production Finisher
• Maximum paper size is A3.
• The Finisher D4 includes a standard Interposer, used to insert pre-printed stock into finished sets without
having to go through the engine (Uncoated 64-220 gsm).
• Coated media, labels & envelopes are not supported.
• Tray capacity equals 150 sheets of 90gsm.
Hole Punching Capability for the Light Production Finisher or Finisher D4.
The Finisher D4 offers Hole Punch as a standard feature.
• Hole punching capacity is for Uncoated 64-200 gsm/Coated 106-200 gsm media.
• Hole punching for B5, A4, B4 & A3 only.
• Hole punching is not available to the Booklet Tray.
• Hole punch capacity is equal to the regular capacity of the chosen output tray.
• For the Australian market, 2- and 4-hole punch is available. Stacks can be punched on the left or right side, or
on the top edge.
Also refer to “Product Limitations – Light Production Finisher (Finisher D4) Limitations”
To Next Page
Loading...
Need help?
General
