Fuji Xerox C60 User Manual

8
*Where a dedicated supply is not available, it is the customer’s responsibility to provide the equivalent, and where the
equivalent is not available, Fuji Xerox will not be held responsible for any damage that may occur.
Fuji Xerox will not be held responsible for any damage that may occur as a result of lightning strikes, power surges, etc.
Fuji Xerox recommends protecting the Fiery Print Server from surges or spikes in electrical power that can damage the
server and result in extended downtime. In areas that tend to experience brownouts or blackouts with more frequency,
installation of an Uninterruptible Power Supply (UPS) is suggested. This protection is the responsibility of the customer.
It is not recommended to have a UPS with software installed. The additional introduction of the software is untested and
not verified by Fuji Xerox.
Surge protectors & UPS’s are provided by the Customer.
Power Consumption / Heat Emission / Noise Emission
Color C60 & C70 Printer
Sleep
Stand-by
Running
Power Consumption
2W (or less)
218W (or less)
1.14 KW (or less)
Heat emission
5.8 BTU/h
743 BTU/h
3889 BTU/h
Noise emission
N/A
+- 34.7 dB (A)
+- 57.4 dB (A)
Sound pressure level according to ISO7779
dB (A)-weighted sound pressure level (bystander positions)
Responsibility Matrix
The following table summarises customer and Fuji Xerox responsibilities relating to the product:
Action
Responsibility
Customer
Fuji Xerox
Installation Actions
Ensure adequate space and power to install device
✓
Confirm and maintain network integrity
✓
Unpack device components
✓
Connect all system components and install device hardware
✓
Install client software / device drivers on PC/workstations
✓*
Configure device to connect to the network
✓
Acquire and install client workstation network hardware and software
✓
Initial operator training
✓
Ongoing Actions
Order and install specified Customer Replaceable Units (CRUs) according to
machine instructions (refer to ‘Supplies’ section later in this document)
✓
Order and install staple and dry ink cartridges according to machine instructions
✓
Remove, repair and re-install any failed components
✓**
Provide Helpline support (Customer Care Centre)
✓**
Provide spare parts
✓**
Provide service
✓**
Perform system software upgrades
✓**
Download any additional fonts to server
✓
Utilise tools mode to adjust machine setting(transfer, registration etc) as required
for particular jobs.
✓
Monitor and adjust calibration for colour matching of colour management
system
✓
Install RIP utilities, printer description files, and print drivers on Client
workstations.
✓
Secure all system software
✓
Setup and administer clients
✓
* Fuji Xerox will provide installation of RIP client software and drivers on one client PC & MAC, as part of the
installation and training session. It is the responsibility of the Customer to disseminate Drivers and utilities to
all other users.
** Fuji Xerox responsibility when a Full Service and Maintenance Agreement (FSMA) is purchased. If FSMA is not
purchased, this action becomes a customer responsibility.

Fuji Xerox C60 Specifications

General

Brand	Fuji Xerox
Model	C60
Category	Printer
Language	English