Supplies
This section details the supplies that can be ordered from Fuji Xerox for the Color C60/C70 product.
Consumables & Ordering
Toner and consumables can be ordered by contacting the Fuji Xerox Customer Care Centre on, 1 800 028 962. or by
ordering on the Internet: http://www.xeroxsupplies.com.au
Each Colour C60/C70 Printer is delivered with an initial supply of Toner (100% full) as well as the CRUs (Drum Cartridges,
Fuser, and Waste Toner Container as well as Staples – included for finishing options with stapling).
Toner Cartridges
Yield Projection
(using centerline paper)
199k (Color C60)/
182k (Color C70)
89k (Color C60)/
81k (Color C70)
Staple Cartridge for Finisher C3,
incl booklet maker
5K staples x 2 cartridges
/ Box
Staple Cartridge for Finisher D4
5K staples x 4 cartridges
/ Box
Staple Cartridge
for Finisher D4 w/ Booklet Maker
5K staples x 4 cartridges
/ Box
GBC Advanced Punch Die Sets
Life: 500K punch cycles
(uncoated, 76 gsm).
Standard. Comes with
the GBC AdvancedPunch.
Life: 500K punch cycles
(uncoated, 76 gsm).
Life: 500K punch cycles
(uncoated, 76 gsm).
Life: 500K punch cycles
(uncoated, 76 gsm).
Life: 500K punch cycles
(uncoated, 76 gsm).
Life: 500K punch cycles
(uncoated, 76 gsm).
Life: 500K punch cycles
(uncoated, 76 gsm).
Life: 500K punch cycles
(uncoated, 76 gsm).
Life: 500K punch cycles
(uncoated, 76 gsm).
Life: 500K punch cycles
(uncoated, 76 gsm).
Life: 500K punch cycles
(uncoated, 76 gsm).
Assumptions: Toner cartridge yield is based on 5% area coverage. Average drum yield is based on a run length of (5) A4
LEF pages. Average waste toner bottle yield is based on 5% area coverage per color. Please note that actual yields vary
greatly depending on color intensity, area coverage, paper stock, and mode selected.