Fuji Xerox docucentre-iv C2270 Administrator's Guide

Stapler Faults
553
Problem Solving
14
7 With holding the tabs, return the cartridge to
the original position, and then gently push
the cartridge in until it clicks into place.
8 Repeat steps 3 to 7 for the cartridge at the back of the unit.
9 Return the unit to the original position.
10 Close the finisher front cover.
Note • If the finisher front cover is not completely closed, a message will appear and the machine
remains paused.
If you cannot remove jammed staples even after you perform the above procedure,
contact our Customer Support Center.

Fuji Xerox docucentre-iv C2270 Specifications

General

Brand	Fuji Xerox
Model	docucentre-iv C2270
Category	All in One Printer
Language	English