To Next Page

To Previous Page

System Settings Procedure

117

Tools

Step 5 Setting a Feature

Select any feature.

Note • Select a submenu from the [Group] list, and then select a feature from the [Features] list.

• Select [ ] or [ ] as required.

2 Select an item to set.

3 After setting the feature, select [Save].

4 Select [Close] repeatedly until the [Services Home] screen is displayed.

Note • If rebooting the machine is required to enable the new settings, when you select [Close] in

the [Tools] screen, a message may be displayed. Follow the message and reboot the

machine. After the machine reboots, it exits from the System Administration mode, and the

<Log In/Out> button is unlit.

Step 6 Exiting System Administration Mode

Press the <Log In/Out> button.

Note • You can also log out by pressing the login information field on the touch screen, and then

selecting [Logout].

• The <Log In/Out> button is unlit when the machine exits from the System Administration

mode.

Fuji Xerox docucentre-iv C3370 Administrator's Guide

Other manuals for Fuji Xerox docucentre-iv C3370