PCL Emulation
603
Appendix
15
Binding 217 Sets binding when printing 2 sided.
You can select [LEF] or [SEF] for 2 sided printing. Select according to the
edge to be bound. Unifies the leading direction of the image on the front
and rear sides of the paper at the long edge of the paper for LEF and at
the short edge of the paper for SEF.
[0] (Default) : LEF
[1] : SEF
Line termination 218 Sets line termination processing.
[0] (Default) : Off
[1] : Add-LF (Appends an LF to CR)
[2] : Add-CR (Appends a CR to LF and FF)
[3] : CR-XX (Appends a CR to LF and FF, and LF to CR)
Default custom
paper size
219
(Short edge)
Specifies the default custom paper size.
[2100] (Default short-edge value) : 210.0 mm
[2970] (Default long-edge value) : 297.0 mm
[0] - [9999] : 0 to 999.9 mm
220
(Long edge)
Parameter
I
tem No. Value
To Next Page
Loading...
Need help?
General
