Broadcast
253
Fax
4
3 Select [On].
4 Select the [F Code] box, and enter the F Code with the numeric keypad.
Note • You can enter up to 20 digits for the F Code.
z
Relay Broadcast
The number of digits of the primary relay station ID:
1: When the primary relay station IDs and address numbers are two digits
2: When the primary relay station IDs and address numbers are three digits
z
Print Directive
Printing/not printing at the primary relay station
1: Printing at the primary relay station
0: No printing at the primary relay station
z
Primary Relay Station ID
The address number for the initiating station registered at the primary relay station
When the primary relay station ID is set, the initiating station is notified of the results of
the Remote Relay Broadcast.
When the primary relay station ID is "00" or "000", the initiating station is not notified of
the results of a Remote Relay Broadcast.
z
Address Number
The address number assigned to the secondary relay station
5 If necessary, enter the password using the numeric keypad.
Relay Broadcast Print
Directive
Primary
Relay
Station ID
Address
Number
Address
Number
Address
Number
....
Up to 20 digits
To Next Page
Loading...
Need help?
General
