5 Scan
306
Scan
5
Note • [Add New Address] is not displayed depending on the settings in the System Administration mode or
the number of registered recipients. For details on the settings and the number of registered
recipients, ask your system administrator.
1 Select [Add New Address].
2 Select a method to register a recipient.
îš„ New
Enter a new recipient using the keyboard.
îš„ Add from current location
Select a location to be registered from the
current locations specified on the First Tab
screen.
Note • When you select this item, the location information will be displayed. This item cannot be selected if
no location is specified on the First Tab screen.
When [New] is selected
3 Select a transfer protocol.
For more information on Transfer Protocol, refer to "Transfer
Protocol (Selecting a Transfer Protocol)" (P.302).
For more information on [Browse], refer to "Browse (Specifying a
Destination PC by Browsing Your Network)" (P.309).
4 Select an item and set.
îš„ When [FTP] is selected
The following items appear:
z
Server
z
Save in
z
User Name
z
Password
îš„ When [SMB] is selected
The following items appear:
z
Server
z
Shared Name
z
Save in
z
User Name
z
Password
To Next Page
Loading...
Need help?
General
