38
Scan
Importing Scanned Data
The scan feature is available using a TWAIN/Windows
®
Image Acquisition (WIA)-compatible
application.
You can set the document load conditions from the computer display to enable you to load the
document while checking the scan results on the Preview screen.
For using this feature, the scan driver included in the Media (Software/Product Manual) must be installed before
use.
The machine supports the scan feature using the USB connection. Scanning using a network is not supported.
1 Place the document.
Refer to "Placing Document" (P.20).
******************************************************************************************************
2 Start an application to load the scanned data.
******************************************************************************************************
3 From the [File] menu, select the item for selecting the scanner (source).
******************************************************************************************************
4 Select [DocuCentre S2011].
******************************************************************************************************
5 Change other options if needed.
******************************************************************************************************
6 Click [Scan].
To Next Page
Loading...
Need help?
General
