Fuji Xerox DocuCentre-V C2275 User Manual

15 Problem Solving
462
Problem Solving
15
White areas or
white or colored
stripes appear.
The machine interior (LED
printheads) may be soiled.
Clean the interior.
Refer to "Cleaning the Interior (LED Printheads)"
(P.102).
The paper is damp. Replace the paper with new one.
Refer to "Loading Paper" (P.62).
The paper is unsuitable. Load suitable paper.
Refer to "Loading Paper" (P.62).
The entire output
is faint.
When Tray 5 is used, the size
and type of the loaded paper
are different from the
settings on the print driver.
Load paper of the correct type and size into
Tray 5.
Refer to "Loading Paper in Tray 5 (Bypass Tray)" (P.65).
Two or more sheets may be
fed simultaneously.
Fan the paper well and load it again.
Refer to "Loading Paper" (P.62).
Paper becomes
wrinkled.
The paper is unsuitable. Replace the paper with new one.
Refer to "Loading Paper" (P.62).
Paper has been added to the
paper loaded.
The paper is damp.
Text is blurred. The paper is unsuitable. Replace the paper with new one.
Refer to "Loading Paper" (P.62).
Paper has been added to the
paper loaded.
The paper is damp.
Symptom Cause Remedy

Fuji Xerox DocuCentre-V C2275 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-V C2275
Category	Printer
Language	English