Fuji Xerox DocuCentre-VI C3371

Copy
126
Copy
3
 Left Page then Right
Scans the left page and then the right page of facing pages, to make 2-sided copies.
 Right Page then Left
Scans the right page and then the left page of facing pages, to make 2-sided copies.
 Top Page then Bottom
Scans the top page and then the bottom page of facing pages, to make 2-sided copies.
 Starting & Ending Page
Displays the [Starting & Ending Page] screen.
Reference
z
Refer to "[Starting & Ending Page] Screen" (P.126).
 Binding Edge Erase
Erases the shadow from the center section of the document. You can set the binding erase
width in the range from 0 to 50 mm in 1 mm increments.
[Starting & Ending Page] Screen
This screen allows you to set the starting and ending pages to be copied.
1 Set [Starting Page] and [Ending Page].
 Starting Page
 [Left Page] / [Right Page]
You can select these options when [Left Page then Right] or [Right Page then Left] is
selected.
 [Top Page] / [Bottom Page]
You can select these options when [Top Page then Bottom] is selected.
 Ending Page
 [Left Page] / [Right Page]
You can select these options when [Left Page then Right] or [Right Page then Left] is
selected.
 [Top Page] / [Bottom Page]
You can select these options when [Top Page then Bottom] is selected.