Fuji Xerox DocuCentre-VI C5571 Administrator's Guide

Problem Solving
574
Problem Solving
15
017-763
[Cause] The server certificate for the POP3 server is expired.
[Remedy] Be sure to match the time set on the POP3 server and the
machine. If the time matches, use the valid server certificate.
017-764
[Cause] The server addresses of the POP3 server and the server
certificate are not same.
[Remedy] Use the valid server certificate in which the correct server
address is written.
017-765
[Cause] An error occurred in connecting to the POP3 server.
[Remedy] Execute the operation again. If the error still is not resolved,
contact our Customer Support Center.
017-766
[Cause] An error occurred in connecting to the POP3 server.
Probable causes are follows.
1) When connecting to the POP3 server by the TLS
communication, the port number is incorrect.
2) When connecting to the POP3 server by the SSL
communication, an internal error occurred.
[Remedy] For 1), set the correct port number for the POP3 server.
For 2), switch off the machine power, make sure that the touch
screen is blank, and then switch on the machine power. If the
error still is not resolved, contact our Customer Support Center.
017-767
[Cause] A SSL server authentication error occurred because the server
certificate for the POP3 server is invalid.
[Remedy] Use the valid server certificate for the POP3 server.
017-768
[Cause] The server certificate for the POP3 server is before the valid
period.
[Remedy] Be sure to match the time set on the POP3 server and the
machine. If the time matches, use the valid server certificate.
017-769
[Cause] The server addresses of the POP3 server and the server
certificate are not same.
[Remedy] Use the valid server certificate in which the correct server
address is written.
017-770
[Cause] An error occurred in connecting to the POP3 server.
[Remedy] Execute the operation again. If the error still is not resolved,
contact our Customer Support Center.
017-771
[Cause] An error occurred.
[Remedy] Execute the operation again. If the error still is not resolved,
contact our Customer Support Center.
017-772
[Cause] The scanned documents is completely blank.
[Remedy] Take one of the following measures.
z
Check whether the document is blank or whether the side of
the document to be scanned is loaded correctly.
z
Select [Image option] in the [Advanced Settings] screen and
set the scan density to be [Darken].
If the error still is not resolved, contact our Customer Support
Center.
Error Code
Cause and Remedy

Fuji Xerox DocuCentre-VI C5571 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-VI C5571
Category	All in One Printer
Language	English