38
3
3
Control panel 3
LEDs (Light Emitting Diodes) 3
This section refers to the two LEDs and the two buttons on the control panel.
1 Power On/Off
You can turn the machine on and off.
Press and hold down to turn the machine on.
Press and hold down to turn the machine off. All the LEDs turn off when you enable the Power Off
mode.
Also, you can use the following functions:
Current Job Cancel / All Jobs Cancel
Error recovery / Form feed
For details, see Power On/Off key on page 44
2 Wi-Fi/WPS
Press the Wi-Fi/WPS button and launch the wireless installer on your computer. Follow the on-screen
instructions to set up a wireless connection between your machine and your network.
When the Wi-Fi/WPS light is on, your Fuji Xerox machine is connected to a wireless access point. When
the Wi-Fi/WPS light blinks, the wireless connection is down, or your machine is in the process of
connecting to a wireless access point.
3 Error LED ( )
The Error LED ( ) indicates that the machine is in error state.
Also, the Error LED ( ) indicates the kind of error in combination with other LEDs.
4 Ready LED ( )
The Ready LED ( ) will blink depending on the machine status.
General Information 3
1
2
3
4
To Next Page
Loading...
Need help?
General
