Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set
Auto Power Off Mode
Set Auto Power Off Mode
If the machine is in Deep Sleep Mode for certain length of time, based on your model and settings, the machine
will go into Power Off Mode automatically. The machine does not go into Power Off Mode when the machine is
connected to a network.
• To start printing, press on the control panel and then send a print job.
>> DocuPrint P235 db
>> DocuPrint P235 d/DocuPrint P275 dw/DocuPrint P285 dw
DocuPrint P235 db
1. Make sure that the front cover is closed and the power cord is plugged in.
2. Press to turn on the machine and make sure only the Ready LED lights up.
3. Press Go four times to turn the function On or Off.
All LEDs blink twice when Auto Power Off Mode is turned on.
All LEDs blink once when Auto Power Off Mode is turned off.
DocuPrint P235 d/DocuPrint P275 dw/DocuPrint P285 dw
Select how long the machine must be in Deep Sleep Mode before it goes into Auto Power Off Mode.
1. Press a or b to display the [General Setup] option, and then press OK.
2. Press a or b to display the [Ecology] option, and then press OK.
3. Press a or b to select the [Auto Power Off] option, and then press OK.
4. Press a or b to select the option you want, and then press Go.
Related Information
• General Settings
229
To Next Page
Loading...
Need help?
General
