281
[Print Menu]
Ecology Toner Save Increase the page yield of the toner cartridge.
Sleep Time Set how much time will pass before the machine enters Power Saving
Mode.
Quiet Mode Decrease printing noise.
Auto Power Off Set the number of hours that the machine will remain in Deep Sleep Mode
before going into Power Off Mode.
Panel Control Button Repeat Set the time for the LCD message to change when holding
▲
or
▼
at
intervals.
Message Scroll Set the time in seconds that an LCD message will scroll across the LCD.
From Level 1=0.2 sec to Level 10=2.0 sec.
LCD Contrast Adjust the contrast of the LCD.
Auto Online Set the machine to return to Ready Mode after it has been idle for 30
seconds.
Setting Lock - Lock your machine’s settings using the Setting Lock password.
Interface Select Select the interface to use.
If you select Auto, the machine changes the interface to USB or Network
depending on which interface is receiving data.
Auto IF Time Set the time-out period for the auto interface selection.
Input Buffer Increase or decrease the input buffer capacity.
Fixed Port Enable or disable the Fixed Port function.
Delete Storage Macro ID Delete the registered Macro data.
Font ID Delete the registered Font data.
Format Restore the Macro and Font data of your machine to the default settings.
Level 1 Level 2 Description
Emulation - Choose the emulation mode.
Auto Continue - Select this setting if you want the machine to clear paper size errors or
media type errors, and use paper from other trays.
Paper Type - Set the type of paper.
Paper Size - Set the size of paper.
Copies - Set the number of printed pages.
Orientation - Set pages to print in either portrait or landscape orientation.
Print Position X Offset Move the print start position (at the top-left corner of pages) horizontally up
to -500 (left) to +500 (right) dots in 300 dpi.
Y Offset Move the print start position (at the top-left corner of pages) vertically up to
-500 (up) to +500 (down) dots in 300 dpi.
Auto FF - Allow the machine to print any remaining data automatically.
Level 1 Level 2 Description