FujiFilm 100 - Unloading the Film or Removing Film in MID-Roll

35
UNLOADING THE FILM OR REMOVING FILM IN MID-ROLL
To Unload the Film
When the last frame in the film has been exposed, the film automatically rewinds
into the film cassette which can then be removed for processing.
☞
When rewinding is complete, the exposure counter will read “ ”.
∗
Sometimes more photographs can be taken than the stated number of exposures, but the final
frame may not be printed.
Check that the motor has stopped and that “ ” is displayed. If the camera back is opened before
“ ” is displayed, the following may occur. (→p.38)
• The film is exposed to the light.
• When the next film is loaded, it is immediately rewound and “ ” blinks.
1