In the selected folder, double click the following file: DriverInstall.CMD. (Depending on your usage
environment, the .CMD extension may not be displayed.)
The driver package installer appropriate for your operating system (32-bit or 64-bit) is selected
automatically.
Figure 1.2.2 Installation file
When you start the installer, a window appears for selecting the language that will be used during the
installation. After you select the language to use, click “OK”.
Figure 1.2.3 Language selection screen
Click “Next >” when the Installation Wizard screen appears.
Figure 1.2.4 Installation Wizard start screen
To Next Page
